Comparisons - Netizzan

Comparisons

This category contains all of our posts on comparisons of one networking technology to another.

FHRP Vs. HSRP: What is the Difference Between Them?

Leave a Comment / Comparisons / /

FHRP (First Hop Redundancy Protocol) and HSRP (Hot Standby Router Protocol) are two network protocols that are often confused with each other. While they are indeed related, they are not exactly the same. Both protocols are used to achieve redundancy in telecommunications networks, ensuring high availability and uninterrupted internet connectivity. This redundancy is especially important […]

FHRP Vs. HSRP: What is the Difference Between Them? Read More »

OSPF Vs RIP: What is the Difference Between Them?

Leave a Comment / Comparisons / /

When it comes to routing protocols in networking, Open Shortest Path First (OSPF) and Routing Information Protocol (RIP) stand out as two commonly used options. Both are Interior Gateway Protocols (IGP), designed to route traffic within a single network or autonomous system rather than between multiple networks like Exterior Gateway Protocols (EGP). However, they differ

OSPF Vs RIP: What is the Difference Between Them? Read More »

ARP vs DHCP: What is The Difference?

Leave a Comment / Comparisons / /

Address Resolution Protocol (ARP) and Dynamic Host Configuration Protocol (DHCP) are two protocols used in associating IP addresses to host devices in a network. ARP is a protocol that is used to map an IP address to a physical machine (mac address) by sending a multicast message on a LAN and recording the mac address

ARP vs DHCP: What is The Difference? Read More »

UDP Vs ICMP: What is the Difference?

Leave a Comment / Comparisons / /

Internet Control Message Protocol (ICMP) and User Datagram Protocol (UDP) are two communication protocols employed for the delivery of data in a network. ICMP operates at the network layer of the TCP/IP suite, assessing network performance and reporting errors in network traffic. It is commonly utilized with the ping and traceroute commands. The ping command

UDP Vs ICMP: What is the Difference? Read More »

TCP vs. ICMP: What’s the difference?

Leave a Comment / Comparisons / /

Transport control protocol (TCP) and internet control message protocol (ICMP) are two communication protocols used for the transport of data between sender and receiver in a network. These two protocols work behind the scenes to ensure your online experience is seamless. In this post, we will walk you through the differences between TCP and ICMP,

TCP vs. ICMP: What’s the difference? Read More »

Dynamic NAT vs. Static NAT: Comparison and Differences

Leave a Comment / Comparisons / /

Network Address Translation (NAT) comprises three main types, with static NAT and dynamic NAT being two of them. Static NAT is a form of address translation that establishes a permanent one-to-one mapping between an inside local IP address (private IP address) and an inside global IP address (public IP address). This mapping enables the private

Dynamic NAT vs. Static NAT: Comparison and Differences Read More »

MPLS vs. IP routing

Comparisons / /

MPLS and IP routing are two packet forwarding technologies used in a network circuit. MPLS is a layer 2.5 packet forwarding technology that uses labels to make its packet forwarding decisions. This label is layer 2 information and contains data about the destination of any packet encapsulated in it. Read more on: MPLS Network Architecture

MPLS vs. IP routing Read More »

4G Modulation vs. 5G Modulation

Leave a Comment / Comparisons / /

In this ever-evolving world of communication technology, modulation plays an important role in ensuring the successful transmission of signals from the sender to the receiver. Both 4G and 5G employ distinct modulation techniques to facilitate rapid and low-latency wireless communication. In this article, we delve into a comparison of 5G and 4G modulation techniques, aiming

4G Modulation vs. 5G Modulation Read More »

MPLS Vs. E-LAN: What is the Difference?

Leave a Comment / Comparisons / /

MPLS and E-LAN are two networking technologies that aid in the distribution of packets in a network. Multiprotocol Label Switching (MPLS) is a layer 2.5 packet forwarding protocol that uses labels to efficiently forward data packets in a network. E-LAN, on the other hand, is a technology that interconnects different LANs in a Metropolitan area

MPLS Vs. E-LAN: What is the Difference? Read More »

MPLS Vs. Fiber: What is the Difference?

Leave a Comment / Comparisons / /

MPLS and Fiber are two transport technologies commonly used in networking. Multiprotocol Label Switching (MPLS) is a layer 2.5 packet forwarding protocol that employs labels to efficiently forward data packets in a network. Fiber, on the other hand, is an Ethernet cable used for transmitting data packets from one end to another in a network.

MPLS Vs. Fiber: What is the Difference? Read More »

Scroll to Top